+
+
+
+
+
+
The RGB Programmable LED Tapes have a width of only 2.7mm and can be easily installed in a tight or narrow space. It adopts the chip-on-board technology and uses high-density 160PCS LED Chips per meter as the light source for consistent, brighter, and uniform lighting, without light dots and dark areas. The Programming COB LED Strips with individual addressable designs and 160PCS ICs control each LED chip to achieve hundreds of lighting effects. The end comes with a 3Pin JST-SM Connector, which is easy to connect to a Smart LED Controller to light up. It comes with 5 meters per roll, and you can cut to any size you want. The minimum cutting length is 12.5mm, and it can be easily cut into desired lengths to fit specific lighting requirements. The flexible feature allows for easy bending and shaping around corners and curves. The Programming LED Strips are non-waterproof, and the back has double-sided adhesive tape, making it easy to stick to where you want to install them. The Programmable Light Strips have a high color index output of over 90Ra, which provides excellent color rendering. With their narrow width and hundreds of lighting effects, you can use them on motorcycles, cars, models, drones, counters, displays, signs, etc.
Features:
- Type: Individual Addressable COB LED Tapes
- Width: 2.7mm
- Length: 5 Meters/16.4FT Per Roll
- LED Chip's Brand: San An
- 160PCS LED Chips Per Meter
- IC Type: WS2812B
- IC Quantity: 160PCS/Meter
- Working Voltage: DC5V/DC12V
- Power: 4Watts/Meter
- Emitting Colors: RGBIC
- Luminous Flux: 110LM Per LED
- View Angle: 180°
- Color Index: >90Ra
- Dimmable: YES
- Control Method: SPI
- Minimum Cutting Length: 12.5mm
- IP Rating: IP20 Non-waterproof
- Back With Double-sided Adhesive Tape
- Lifespan: 50,000 Hours
- 2 Years Warranty
Includes:
1*Programmable LED Tape(5M/16.4FT Per Roll)
