+
+
+
+
+
+
+
+
+
+
+
+
The strip light covers are made of high-quality silicone material and are flexible and bendable. They can be bent around corners and curves, making them ideal for creative lighting designs. The standard length is 16.4FT per reel and cuttable, the maximum size is 100 or 200 meters per roll, and you can cut to any length for your project or use them to create long recessed linear illumination. It has a thin flange design and can be recessed into the slots on the wall or ceiling for indoor and outdoor design. Various widths of silicone waterproof covers allow the width from 3mm to 20mm. We recommend adding the COB tapes as the source to create uniform illumination with no visible dots and dark areas. You also can use them for outdoor projects in wet, rainy, or harsh locations. Protects the bendable tapes from dust and dirt and creates an easily wiped-clean surface. There are transparent lips and white lips products available, you can use them for different applications.
Features:
- Material: Silicone
- Models: T1010, T1212, T1616, T2010, T2014, T2020, T2520, T3020, T4020, T5020
- Standard Length: 16.4FT(5M)/Reel
- Max Length: 50Meters, 100Meters, 200Meters/Roll(Depends On Size)
- Colors Of Edges Available: White, Transparent
- Size(Width*Height): 15*10mm(T1010), 18*12mm(T1212), 23.5*16mm(T1616), 26*10mm(T2010), 26*14mm(T2014), 26*20mm(T2020), 30*20mm(T2520), 37.5*20mm(T3020),45*20mm(T4020), 56*20mm(T5020)
- Allow Max Width Of LED Strips: 3-5mm(T1010), ≤7mm(T1212), ≤8mm(T1616), 10-12mm(T2010), 8-14mm(T2014), 10-12mm(T2020), 10-18mm(T2520), 10-20mm(T3020), 10-30mm(T4020), 10-30mm(T5020)
- Flexible And Bendable
- Cuttable: YES
- View Angle: 120°
- Waterproof Level: IP67
- Installation Method: Recessed
- Working Temperature: -40℃-100℃
- Lifespan: 50,000 Hours
- Applications: Bars, Shower Niches, Bathrooms, Bedrooms, Kitchens, Exterior & Interior House, Cars, etc
- 3 Years Warranty
Includes:
1*LED Diffuser Cover(16.4FT/Reel)
How To Install Them:
1) Cut a slot in the place where you want to install them; do not too loose or too tight, which allows you to press into the silicone diffusers.
2) Connect the tapes to dimmers or controllers to adjust the brightness, color temperature, dynamic mode, or colors. Or you can connect to a power supply to light up directly. If for outdoor applications, the connections should be waterproofing.
3) Install flexible strips; you can add SMD or COB tapes, and high-density products are recommended to avoid hot spots or dark areas. Double-sided adhesive tapes, glues, or snapping can mount the taping tubes.
4) Press the silicone diffusers into the groove, and you can drop silicone glue on the side to prevent it from falling off if needed.
5) Installation complete.
Important Notes:
The tapes, controllers, and power drivers are not included and are sold separately.
The default length is 5 meters per piece, and the max length can be 50M, 100M, and 200 meters, depending on the sizes.
For outdoor applications, you will need waterproof LED strips; we recommend IP67 or IP68 waterproof levels.
The length is 5 meters, but If you order more than one piece, we will send you a continuous one to reduce waste.
We accept custom orders; you can customize the surface, body, and lips color.